TLB Analog

 

Optoisolated 16 bit analog output.
Current: 0÷20 mA; 4÷20 mA (up to 300 Ω).
Voltage: 0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ).
Equipped with RS485 serial port.

 

Weight transmitter suitable for back panel mounting on Omega/DIN rail.

 

Space-saving vertical shape.

 

Dimensions: 115x25x120 mm.

 

6-digit semi-alphanumeric red LED display (8 mm height).

 

6 signalling LED.

 

Four buttons for the system calibration.

 

Extractable screw terminal blocks.

 

The instrument can be configured and managed using the free

“Instrument Manager

 

RS485 serial port for communication via protocols ModBus RTU,

 

ASCII Laumas bidirectional or continuous one

                                                    way transmission.

 

                                                 3 relay outputs controlled by the setpoint values

 

                                                 2 optoisolated PNP digital inputs: status reading via serial

 

                                                    communication protocols.

 

                                                 1 load cell dedicated input.

 

 

TLB 4

Optoisolated 16 bit analog output.
Current: 0÷20 mA; 4÷20 mA (up to 300 Ω).
Voltage: 0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ).
Equipped with RS485 serial port.

 

Weight transmitter with 4 independent reading channels with

 

display of the total weight.

 

The TLB4 series allows to have same benefits and

performance of an advanced digital weighing system even

using analog load cells.

 

Back panel mounting on Omega/DIN rail

                                                  (space-saving vertical shape).

•                                                   3 relay outputs controlled by the setpoint values
  
•                                                   2 optoisolated PNP digital inputs:
•                                                      status reading via serial communication protocols.
•                                                   1 load cell dedicated input.

 

 

 

 

 

 

 

 

The LCB transforms an analog load cell (mV/V output) into a digital

 

one; it can also be used on existing load cells to digitize the

 

weighing system.

 

Conceived for IoT applications (Internet of Things).

 

PC configuration software via micro USB port.

 

Status LED of the communication interface.

 

INPUTS/OUTPUTS AND COMMUNICATION

 

1 micro USB port.

 

3 relay outputs controlled by the setpoint values

                                                            or via protocols.

 

                                                         2 digital inputs: status reading via

                                                            serial communication protocols.

 

                                                         1 load cell input.

 

                                         Datasheet

 

 

Weight transmitter with 8 independent reading channels with

 

display of the total weight.

 

The TLM8 series allows to have same

benefits and performance of an advanced

digital weighing system even using analog load cells.

 

 

TEST key for direct access to the diagnostic functions.

 

Back panel mounting on Omega/DIN rail or junction box (on request). Dimensions: 148x92x60 mm.

 

Backlit LCD graphic display, resolution: 128x64 pixel,

visible area: 60x32 mm.

5-key keyboard.

Extractable screw terminal blocks.

The instrument can be configured and managed using the free “Instrument Manager”

Weight transmitter and indicator for Omega/DIN rail mounting suitable for back panel or

junction box.

Dimensions: 90 x 95 x 60 mm.

Backlit: alphanumeric LCD display,

38x16 mm visible area,

two-line by eight-digit (5 mm height).
Digital rotary control (Encoder) with integrated button.

 

16-bit analog output, speeded (update time = 3 ms) selectable via dip-switches:
0-20mA; 4-20mA; 0-10V; 0-5V; ± 10V; ± 5V

 

In monodirectional mode the RS485 port can be directly connected to PC’s RS232 port.

 

 

Weight transmitter suitable for back panel mounting on Omega/DIN rail or junction box (on request).

 

Dimensions: 123x92x50 mm.

 

6-digit semi-alphanumeric red LED display

(8 mm height).

 

6 signalling LED.

 

4-key keyboard.

 

The instrument can be configured and managed using the free “Instrument Manager” PC software

 

INPUTS/OUTPUTS AND COMMUNICATION

 

 

RS485 serial port for communication via protocols ModBus RTU,

 

ASCII Laumas bidirectional or continuous one way transmission.

 

• Current or voltage 16 bit optoisolated analog output.
• 16 bit = 65535 divisions. 0÷20 mA; 4÷20 mA (up to 300 Ω)
• 0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ)

 

• 2 optorelay outputs controlled by the setpoint values or via protocols.
• 2 optoisolated PNP digital inputs: status reading via serial communication protocols.
• 4 load cell dedicated inputs