Weighing Controller with ProfiNet IO Interface

Weight transmitter suitable for back panel mounting on Omega/DIN rail.

2x PROFINET IO ports.
Type: RJ45 100Base-TX.
The instrument works as device in a Profinet IO network.
Equipped with RS485 serial port.

Space-saving vertical shape.

Dimensions: 115x25x120 mm.

6-digit semi-alphanumeric red LED display (8 mm height).

6 signalling LED.

Four buttons for the system calibration.

Extractable screw terminal blocks.

The instrument can be configured and managed using the free

“Instrument Manager

RS485 serial port for communication via protocols ModBus RTU,

ASCII Laumas bidirectional or continuous one

                                                    way transmission.

•                                                  3 relay outputs controlled by the setpoint values
•                                                  2 optoisolated PNP digital inputs                        
•                                                  1 load cell dedicated input.

Weight transmitter with 4 independent reading channels with

display of the total weight.

Two PROFINET IO ports

  Mounting on Omega/DIN rail for front/back panel

 4 channels A/D converter 24bit (16000000 points) 4.8 kHz

Option:

OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI

The TLB4 series allows to have same benefits and

performance of an advanced digital weighing system even

using analog load cells.

Back panel mounting on Omega/DIN rail

                                                  (space-saving vertical shape).

•                                                   3 relay outputs controlled by the setpoint values
  
•                                                   2 optoisolated PNP digital inputs:
•                                                      status reading via serial communication protocols.
•                                                   1 load cell dedicated input.

Weight transmitter with 8 independent reading channels with display of the total weight.

• Two PROFINET IO ports
• 16-bit Analog output: 0/4-20 mA; 0-5/10 V
• RS485 port (Modbus RTU/Laumas ASCII protocol)
• 2 logic inputs, 3 relay outputs
• Mounting on Omega/DIN rail for front/back panel
• 8 channels A/D converter 24bit (16000000 points) 4.8 kHz

Option:

OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI

PROFINET IO ports.
Type: RJ45 100Base-TX.
The instrument works as device in a Profinet IO network.
Equipped with RS485 serial port and analog output.

The TLM8 series allows to have same

benefits and performance of an advanced

digital weighing system even using analog load cells.

TEST key for direct access to the diagnostic functions.

Back panel mounting on Omega/DIN rail or junction box (on request). Dimensions: 148x92x60 mm.

Backlit LCD graphic display, resolution: 128x64 pixel,

visible area: 60x32 mm.

5-key keyboard.

Extractable screw terminal blocks.

The instrument can be configured and managed using the free “Instrument Manager”

The LCB transforms an analog load cell (mV/V output) into a digital one;

it can also be used on existing load cells to digitize the

weighing system.

Conceived for IoT applications (Internet of Things).

PC configuration software via micro USB port.

Status LED of the communication interface.

       INPUTS/OUTPUTS AND COMMUNICATION

• PROFINET IO.
  2x female M12 circular connectors, D-coded, 4-pin.
  The instrument works as device in a Profinet IO network16-bit Analog output: 0/4-20 mA; 0-5/10 V (optional)
• 1 micro USB port.
• 3 relay outputs controlled by the setpoint values or via protocols.
• 2 digital inputs: status reading via serial communication protocols.
• 1 load cell input.

Weight indicator in DIN box suitable for front panel mounting.

RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)

• 3 logic inputs
• 5 relay outputs
• OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI

OIML R61 approved - WELMEC Guide 8.8:2011 (M.I.D.)

• Dimensions: 96x130x96 mm (drilling template: 92x92 mm).
• 6-digit semi-alphanumeric red LED display (14 mm height).
• 8 signalling LED.
• 5-key keyboard.
• IP54 front panel protection rating (IP65 front optional).
• Real-time clock/calendar with buffer battery.
• Extractable screw terminal blocks.

The instrument can be configured and managed using the free 

“Instrument Manager” PC software

Profinet IO protocol - Ethernet port.

Option:

Multiprogram: single loading/unloading and multi-product batchings, max 99 recipes