Weighing Controller with Profibus DP Interface
Weight Transmitter TLB Profibus
Weight transmitter suitable for back panel mounting on Omega/DIN rail.
PROFIBUS DP port.
Baud rate: up to 12 Mbit/s.
The instrument works as slave in a Profibus DP network.
Equipped with RS485 serial port.
Space-saving vertical shape.
Dimensions: 115x25x120 mm.
6-digit semi-alphanumeric red LED display (8 mm height).
6 signalling LED.
Four buttons for the system calibration
Extractable screw terminal blocks.A/D converter 24bit (16000000 points) 4.8 kHz
The instrument can be configured and managed using the free
“Instrument Manager
RS485 serial port for communication via protocols ModBus RTU,
ASCII Laumas bidirectional or continuous one
way transmission.
3 relay outputs controlled by the setpoint values
2 optoisolated PNP digital inputs: status reading via serial
communication protocols.
1 load cell dedicated input.
4Channel Weight TransmitterTLB 4 with Profibusinterface
Weight transmitter with 4 independent reading channels with
display of the total weight.
PROFIBUS DP port.
Baud rate: up to 12 Mbit/s.
The instrument works as slave in a Profibus DP network.
Equipped with RS485 serial port
Mounting on Omega/DIN rail for front/back panel
4 channels A/D converter 24bit (16000000 points) 4.8 kHz
Option:
OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI
The TLB4 series allows to have same benefits and
performance of an advanced digital weighing system even
using analog load cells.
Back panel mounting on Omega/DIN rail
(space-saving vertical shape).
-
3 relay outputs controlled by the setpoint values
- 2 optoisolated PNP digital inputs:
- status reading via serial communication protocols.
- 1 load cell dedicated input.
Multichannel Weight Transmitter TLM 8 Profibus
Weight transmitter with 8 independent reading channels with display of the total weight.
-
PROFIBUS DP port.
Baud rate: up to 12 Mbit/s.
The instrument works as slave in a Profibus DP network.
Equipped with RS485 serial port and analog output - 16-bit Analog output: 0/4-20 mA; 0-5/10 V
- RS485 port (Modbus RTU/Laumas ASCII protocol)
- 2 logic inputs, 3 relay outputs
- Mounting on Omega/DIN rail for front/back panel
- 8 channels A/D converter 24bit (16000000 points) 4.8 kHz
Option:
OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI
PROFINET IO ports.
Type: RJ45 100Base-TX.
The instrument works as device in a Profinet IO network.
Equipped with RS485 serial port and analog output.
The TLM8 series allows to have same
benefits and performance of an advanced
digital weighing system even using analog load cells.
TEST key for direct access to the diagnostic functions.
Back panel mounting on Omega/DIN rail or junction box (on request). Dimensions: 148x92x60 mm.
Backlit LCD graphic display, resolution: 128x64 pixel,
visible area: 60x32 mm.
5-key keyboard.
DIGITAL WEIGHT TRANSMITTER (RS485 - PROFIBUS)
Weight transmitter and indicator for Omega/DIN rail mounting suitable for back panel or junction box. Six-digit semialphanumeric display (11mm h),
7 segment LED. Four-key keyboard.
Dimensions: 148x92x50 mm.
IP67 box version dimensions: 170x140x95 mm.
Four fixing holes diameter 4 mm
(centre distance 122x152 mm).
The instrument is equipped with two communication ports:
- Slave Profibus DP port (instrument registered to Profibus
organization - PNO), max 32 instruments without line
repeaters; max 126 instruments with
line repeaters
W200 WEIGHT INDICATOR (for weighing and batching)
Weight indicator in DIN box suitable for front panel mounting.
RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol)
- 3 logic inputs
- 5 relay outputs
- OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI
OIML R61 approved - WELMEC Guide 8.8:2011 (M.I.D.)
- Dimensions: 96x130x96 mm (drilling template: 92x92 mm).
- 6-digit semi-alphanumeric red LED display (14 mm height).
- 8 signalling LED.
- 5-key keyboard.
- IP54 front panel protection rating (IP65 front optional).
- Real-time clock/calendar with buffer battery.
- Extractable screw terminal blocks.
The instrument can be configured and managed using the free
“Instrument Manager” PC software
Profibus DP protocol
Option:
Multiprogram: single loading/unloading and multi-product batchings, max 99 recipes
WDESK-L WEIGHT INDICATOR - WEIGHING AND BATCHING
ABS weight indicator.
L version: 6-digit semi-alphanumeric backlit LCD display
(20 mm height) - 46 signalling symbols.
R version: 6-digit semi-alphanumeric red LED display
(20 mm height) - 16 signaling LED.
6-key keyboard.
Real-time clock/calendar with buffer battery.
The instrument can be configured and managed using the free “Instrument Manager” PC software
OIML R76:2006, class III, 3x10000 divisions, 0.2 μV/VSI / OIML R61 - WELMEC Guide 8.8:2011 (MID)
INPUTS/OUTPUTS AND COMMUNICATION
- RS485/RS232 serial ports for communication via protocols
- ModBus RTU, ASCII Laumas bidirectional or continuous one way transmission.
- 5 relay outputs controlled by the setpoint values or via protocols
- (4 outputs if analog output is present).
- 3 optoisolated PNP digital inputs: status reading via serial
- communication protocols (2 inputs if analog output is present).
- 1 load cell dedicated input.
- Current or voltage 16 bit optoisolated analog output (option on request).
- WiFi module (option on request).
WDESK-G WEIGHT INDICATOR for WEIGHING AND BATCHING
ABS Weight Indicator
Backlit LCD graphic display, resolution: 240x64 pixel, visible area: 133x39 mm.
21-key keyboard.
Real-time clock/calendar with buffer battery
BASE PROGRAM
- Piece counting.
- Weight totalizing.
- Statistical checking of prepackages
BATCHING PROGRAM
- Graphical representation of the system load status.
- 99 settable formulas.
- Batching resume after a blackout.
- Automatic fall calculation.
- Tolerance error control.
- Precision batching through slow function.
- Precision batching through tapping function.
- Consumption storage.
- Production storage.
-
Products stocks management.
